Polish
            INSTALACJA kart ethernet PCMCIA dla laptopow
            ============================================

1. Przekopiowac plik 'new.tgz' do katalogu glownego MLinuxa tam gdzie linux.bat
2. Zainstalowac pakiet 'new.tgz' komenda:  tar -zxvf new.tar
3. W pliku linux.bat zamiast slowo: 'bzimage' wpisac: 'k2225'
   tak jest:
              \linux\boot\loadlin \linux\boot\bzimage root=/dev/hda1 rw
   a tak ma byc:
             \linux\boot\loadlin \linux\boot\k2225 root=/dev/hda1 rw

4. Dodac mowy modul PCMCIA do systemu komenda:  depmod -a
5. Przeladowac MiniLinuxa i karta PCMCIA powinna sie zainstalowac.

UWAGA: gdyby po instalacji karty i wyjsciu z MLinuxa ponownie nie chciala sie 
       karta sieciowa zainstalowac to trzeba w linux.bat na samym poczatku 
       wpisac linie:
                      erase c:\linux\var\run\stab

No i wowczas bedzie dzialac.


English.

      The INSTALLATION of cards the Ethernet PCMCIA for laptops 
      =========================================================

1. to Copy file 'new.tgz' to root directory MLinux there where linux.bat 
2. to Install packet 'new.tgz' command:  tar -zxvf new.tar 
3. In file linux.bat to write instead of word  'bzimage ' to 'k2225'
   it yes :
           \linux\boot\loadlin \linux\boot\bzimage root=/dev/hda1 rw 
   and it has to be so:
           \linux\boot\loadlin \linux\boot\k2225 root=/dev/hda1 rw

4. to Add speeches modul PCMCIA to system command:  depmod -a
5. to Reload MiniLinux and card PCMCIA should to install.

ATTENTION: after installation of card and the exit from MLinuxa again if
	   would it she wanted oneself to install network card this it was
           one should in linux.bat on only beginning 
       to write tench:
                      erase c:\linux\var\run\stab 

So it will act then.

                                         73 de Janusz SP1LOP