| |
N1URO > 44NET 09.03.21 20:10z 26 Lines 1072 Bytes #999 (0) @ WW
BID : 62487_N1URO
Read: GUEST
Subj: ampr-ripd (was portal.ampr.org)
Path: SR1BSZ<EA2RCF<I0OJJ<GB7CIP<N1URO
Sent: 210309/1959Z @:N1URO.#CCT.CT.USA.NOAM #:62487 [Unionville] $:62487_N1URO
Paul;
> Link to the portal.ampr.org
> was also solved by adding a static routing
> on the ipencap routing side of this system
> and for linking to the conver EU_HUB.
> When the original BGP routing was changed,
In the beginning I had this issue as well. If you recall the email thread
between g1fef, you, and myself this was something Chris initially did from
the pressure of the 44net BGP community which has total disregard to the
ipencap folks. Chris did add an entry in the rip tables at amprgate so
routing to the portal, www.ampr.org, hub_eu, etc all may be encapsulated
via UCSD now. I did test this with Chris and it's been fine since.
Gus;
> However 'ampr-ripd' and the associated linux 'tunl0'
> remain silent forever and so don't work here in my
> station. The fact begin after the portal BGP asset.
If ampr-ripd is not populating routes to your tunl0, this is most likely
caused by sending RIP to your JNOS2 system via a DMZ and not to your primary
tunl0 IP... but if you're happy with what you have that's great :)
---
SendBBS v1.1 by N1URO for LinFBB
Read previous mail | Read next mail
| |